Utsolgt
Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud
  • Xiegu 6100 HF og Anytone 6666Pro vinnerbud

Xiegu 6100 HF og Anytone 6666Pro vinnerbud

Produktet er utsolgt.

7.400,00 NOK

(inkl. mva.)

Veil. salgspris 7.400,00 NOK (inkl. mva.)

Ingen produktomtale
Vekt: 3 kg.
Lagerstatus: Ikke på lager

Xiegu x600 HF og Anytone 6666Pro

Xiegu X6100 HF/50MHz Portable SDR Transceiver

bestillingsvare ca 5 dager.

 

 

Mere infos:

Xiegu X6100 is an ultra-portable SDR transceiver (Software Defined Radio) for HF and 6m. High performance and rich functionality is provided by a direct down-conversion and sampling architecture. With its compact size and smart form factor X6100 brings you a brand-new experience of amateur radio.

X6100 has independent baseband and RF units. The baseband unit provides control, advanced data processing, digital signal processing, multimedia interface functions, and can add new functions continuously through firmware updates. The RF unit is based on the SDR structure with separate transmit and receive paths. With a 24bit sampling rate and large dynamic RF front-end unit, the X6100 is a high performance transceiver that lets you work the world when you’re out on an adventure in nature, in the camper or on a beach far away.

X6100 sports two USB interfaces, one USB to serial adapter with sound card and another to support mouse, keyboard and storage devices. A microSD card slot allows for backup and transfer of memory channels and voice keyer recordings. An XPA125B amplifier can connect via with a dedicated cable (optional accessory) to provide for 100W transmit power. External third-party SDR software applications like HDSDR can be connected via the I/Q signal output.

 

Xiegu X6100 Key Features

  • HF/50MHz all mode including data
  • 10 W transmit power with external power source, 5 W with internal battery
  • 4″ high-resolution color screen, 800*480 pixels resolution
  • Built-in rechargable large capacity lithium battery pack, 12V/3,5 Ah
  • Built-in efficient automatic antenna tuner
  • Standing wave scanner
  • Voice memory keyer
  • CW memory keyer
  • Native Bluetooth and WiFi supports wireless audio, keyboard & mouse
  • Onboard USB serial adapter with sound card
  • Second USB host port to support mouse, keyboard and storage device
  • High stability TCXO internal clock source

 

Xiegu X6100 General Specifications

  • Frequency coverage: 0,5-30+50-54MHz (Transmit in Ham Bands)
  • Operating modes: USB/LSB (J3E), CW (A1A), FM (F3E)，RTTY (F1B), AM (A3E)
  • Minimum Frequency Step: 1 Hz
  • External power supply voltage: DC9-15V
  • Frequency stability: ±1.5ppm within 10~30min after startup @25°C: 1ppm/hour
  • Antenna Impedance: 50 Ohm
  • Antenna connector type: BNC
  • Operating temperature range: 0C to +50C
  • Current consumption: RX: <330mA, TX: <3A

 

Xiegu X6100 Receiver Specifications

  • Frequency coverage: 0,5-30+50-54MHz
  • Receive sensitivity (10dBS/N)
    • (PRE=on, ATT=off, NB=off,NR=off, SSB/CW/AM = 10dB S/N, FM = 12dB SINAD)
    • SSB/CW: 0.20 uV
    • FM 28-30, 50-54 MHz 0.22 uV
    • AM 0,55-1,79 MHz: 10 uV
    • AM 1,8-30 MHz: 2 uV
    • AM 50-54 MHz: 2 uV
  • ADC: 24 bit
  • Spectrum display bandwidth: 96 kHz
  • Spectrum refresh rate: 25 frames/a
  • Spectrum background noise: -140 dBm
  • Audio output: 0,4W (4 Ohm ≥10% THD)
  • 2kHz BDR (Critical frequency suppression): ≥110 dB
  • RMDR: ≥85 dB
  • IMD3: ≥95 dB
  • MDS: -138 dBm

 

Xiegu X6100 Transmitter Specifications

  • Frequency range
    • 1.8~2.0 MHz
    • 3.5~3.9 MHz
    • 5.3515~5.3665 MHz
    • 7.0~7.2 MHz
    • 10.1~10.15 MHz
    • 14.0~14.35 MHz
    • 18.068~18.168 MHz
    • 21.0~21.45 MHz
    • 24.89~24.99 MHz
    • 28.0~29.7 MHz
    • 50~54 MHz
  • Output Power: 10W (SSB/CW/FM) @13.8VDC
    • 2.5W (AM carrier wave) @13.8VDC
  • Output Power, internal battery: 5W
    • 1.5W (AM carrier wave) @ battery
  • Spurious suppression: 1.8~29.6MHz: ≥50dB
    • 50-54 MHz ≥60 dB
  • Carrier suppression: ≥50dB
  • SSB Frequency Response: 300-2700Hz (-6dB)
  • FM Modulation Swing; +/- 5kHz
  • Mic Impedance: o,2-10k (600 Ohm typical)
  • Antenna tuner tuning impedance range: 1:4.5
  • Antenna tuner initial tuning time: ≥ 15s
  • Antenna tuner memory recall time ≥ 0.2s

 

Xiegu X6100 Wireless network/Bluetooth

  • Wireless LAN standard: IEEE802.11b/g/n
  • Authentication and encryption: WEP (64/128bit)
  • WPA-PSK(TKIP)
  • WPA2-PSK(AES)
  • Frequency band: 2.4G
  • Bluetooth version: 4.0

 

Xiegu X6100 General Specifications

  • Dimensions: 180 x 86 x 49 mm
  • Weight: 880 g (radio unit only)

 

Xiegu X6100 In the Box

  • X6100 radio unit complete with antenna tuner and internal rechargeable battery
  • Microphone with backlit remote control keypad
  • Serial cable for PC connection
  • 12 Volt DC power cord
  • English manual
  • Xiegu Service Card

utsolgt etter Svenske tilbud som gikk ut på fredag men nye på vei inn i forbindelse med lørdagsåpent lørdag 28.09

Mere info:

The XIEGU G90 HF Transceiver is a High Performance Portable Amateur Radio Transceiver.

This powerful portable HF multimode transceiver covers 0.5-30MHz general coverage receiver  and 10-160 metre amateur band Tx/Rx coverage with 20 watts of RF output.

Xiegu G90 HF Transceiver

The XIEGU G90 HF Transceiver is a High-Performance Portable Amateur Radio Transceiver. This powerful portable HF multimode transceiver covers 0.5-30MHz (10-160 metres on TX) with 20 watts of RF output.

The XIEGU G90 HF Transceiver utilises a software-defined (SDR) 24-bit architecture to provide superb transmit and receive performance.

The XIEGU G90 HF Amateur Radio Transceiver includes an automatic antenna tuning unit ensuring your antenna impedance is optimised for the frequency you select and ensures maximum performance of your setup.

We also stock the CE-19 interface, recommended for digital modes and  to provide isolation when using an external linear amplifier. Only sold to licensed amateur radio operators and used on amateur frequencies.

Features

  • High-performance front end with narrowband pre-selectors
  • Frequency range of 0.5-30MHz (TX in Amateur bands)
  • Inbuilt user selectable preamp and attenuator in receive mode
  • SSB/CW/AM/FM* TX/RX modes
  • 1.8-inch high brightness colour TFT LCD screen
  • ±24kHz bandwidth Fast-scan spectrum display with waterfall
  • Fully adjustable RX bandpass filters (CW mode down to 50Hz)
  • CW decode capability
  • Detachable front panel/display unit
  • Up to 20W of RF power
  • Reverse polarity protection
  • A built-in wide-range automatic antenna tuner
  • I/Q output for interfacing with a PC or XDT1 panadapter
Receive Frequency Range: Transmit frequency range:
                                                                     0.5MHz~29.999999MHz

1.8~2.0MHz, 3.5~4.0MHz, 7.0~7.3MHz, 10.1~10.15MHz, 14.0~14.35MHz, 18.068~18.168MHz, 21.0~21.45MHz, 24.89~24.99MHz, 28.0~29.7MHz

Features and Specifications

  • Operating modes: SSB/CW/AM
  • Receive sensitivity: 0.25uV @12dB SINAD  (Preamp:ON)
  • Adjacent channel suppression: 60dB
  • Bandwidth: SSB 2.4kHz, CW 300Hz
  • Dynamic Range: 90dB
  • Frequency stability: ±2ppm (after 30 min)
  • Operating voltage range: 11~16V DC
  • Standby current: 750mA @ Max
  • TX current drain: 8A @ Max
  • Reverse Polarity Protection
  • RF output: 20W
  • Carrier suppression: ≥40dB
  • Spurious suppression: ≥50dB
  • Sideband suppression: ≥55dB
  • Audio output power: 0.5W@ 4Ω
  • Temperature range: 0°C~55°C
  • Case size: 120*45*210 mm
  • Weight: 2.4 Kg

ATU specifications

  • Initial tuning time: ≤10s
  • Re-entry tuning time: ≤50ms
  • Tuned impedance range: 15Ω~250Ω

Kommentarer 0

Produktets tagger

Det er ikke registrert noen tagger.

Mine tagger

Liknende produkter