Xiegu X5105 HF/50MHz QRP Transceiver
Xiegu X6100 HF/50MHz Portable SDR Transceiver
bestillingsvare ca 5 dager.
Mere infos:
Xiegu X6100 is an ultra-portable SDR transceiver (Software Defined Radio) for HF and 6m. High performance and rich functionality is provided by a direct down-conversion and sampling architecture. With its compact size and smart form factor X6100 brings you a brand-new experience of amateur radio.
X6100 has independent baseband and RF units. The baseband unit provides control, advanced data processing, digital signal processing, multimedia interface functions, and can add new functions continuously through firmware updates. The RF unit is based on the SDR structure with separate transmit and receive paths. With a 24bit sampling rate and large dynamic RF front-end unit, the X6100 is a high performance transceiver that lets you work the world when you’re out on an adventure in nature, in the camper or on a beach far away.
X6100 sports two USB interfaces, one USB to serial adapter with sound card and another to support mouse, keyboard and storage devices. A microSD card slot allows for backup and transfer of memory channels and voice keyer recordings. An XPA125B amplifier can connect via with a dedicated cable (optional accessory) to provide for 100W transmit power. External third-party SDR software applications like HDSDR can be connected via the I/Q signal output.
Xiegu X6100 Key Features
- HF/50MHz all mode including data
- 10 W transmit power with external power source, 5 W with internal battery
- 4″ high-resolution color screen, 800*480 pixels resolution
- Built-in rechargable large capacity lithium battery pack, 12V/3,5 Ah
- Built-in efficient automatic antenna tuner
- Standing wave scanner
- Voice memory keyer
- CW memory keyer
- Native Bluetooth and WiFi supports wireless audio, keyboard & mouse
- Onboard USB serial adapter with sound card
- Second USB host port to support mouse, keyboard and storage device
- High stability TCXO internal clock source
Xiegu X6100 General Specifications
- Frequency coverage: 0,5-30+50-54MHz (Transmit in Ham Bands)
- Operating modes: USB/LSB (J3E), CW (A1A), FM (F3E)，RTTY (F1B), AM (A3E)
- Minimum Frequency Step: 1 Hz
- External power supply voltage: DC9-15V
- Frequency stability: ±1.5ppm within 10~30min after startup @25°C: 1ppm/hour
- Antenna Impedance: 50 Ohm
- Antenna connector type: BNC
- Operating temperature range: 0C to +50C
- Current consumption: RX: <330mA, TX: <3A
Xiegu X6100 Receiver Specifications
- Frequency coverage: 0,5-30+50-54MHz
- Receive sensitivity (10dBS/N)
- (PRE=on, ATT=off, NB=off,NR=off, SSB/CW/AM = 10dB S/N, FM = 12dB SINAD)
- SSB/CW: 0.20 uV
- FM 28-30, 50-54 MHz 0.22 uV
- AM 0,55-1,79 MHz: 10 uV
- AM 1,8-30 MHz: 2 uV
- AM 50-54 MHz: 2 uV
- ADC: 24 bit
- Spectrum display bandwidth: 96 kHz
- Spectrum refresh rate: 25 frames/a
- Spectrum background noise: -140 dBm
- Audio output: 0,4W (4 Ohm ≥10% THD)
- 2kHz BDR (Critical frequency suppression): ≥110 dB
- RMDR: ≥85 dB
- IMD3: ≥95 dB
- MDS: -138 dBm
Xiegu X6100 Transmitter Specifications
- Frequency range
- 1.8~2.0 MHz
- 3.5~3.9 MHz
- 5.3515~5.3665 MHz
- 7.0~7.2 MHz
- 10.1~10.15 MHz
- 14.0~14.35 MHz
- 18.068~18.168 MHz
- 21.0~21.45 MHz
- 24.89~24.99 MHz
- 28.0~29.7 MHz
- 50~54 MHz
- Output Power: 10W (SSB/CW/FM) @13.8VDC
- 2.5W (AM carrier wave) @13.8VDC
- Output Power, internal battery: 5W
- 1.5W (AM carrier wave) @ battery
- Spurious suppression: 1.8~29.6MHz: ≥50dB
- 50-54 MHz ≥60 dB
- Carrier suppression: ≥50dB
- SSB Frequency Response: 300-2700Hz (-6dB)
- FM Modulation Swing; +/- 5kHz
- Mic Impedance: o,2-10k (600 Ohm typical)
- Antenna tuner tuning impedance range: 1:4.5
- Antenna tuner initial tuning time: ≥ 15s
- Antenna tuner memory recall time ≥ 0.2s
Xiegu X6100 Wireless network/Bluetooth
- Wireless LAN standard: IEEE802.11b/g/n
- Authentication and encryption: WEP (64/128bit)
- WPA-PSK(TKIP)
- WPA2-PSK(AES)
- Frequency band: 2.4G
- Bluetooth version: 4.0
Xiegu X6100 General Specifications
- Dimensions: 180 x 86 x 49 mm
- Weight: 880 g (radio unit only)
Xiegu X6100 In the Box
- X6100 radio unit complete with antenna tuner and internal rechargeable battery
- Microphone with backlit remote control keypad
- Serial cable for PC connection
- 12 Volt DC power cord
- English manual
- Xiegu Service Card
Mere info:
Xiegu X5105 is an ultra portable HF and 50 MHz QRP transceiver with a general coverage receiver,
large LCD display, automatic antenna tuner and a built in high capacity battery making it the perfect portable companion. Please note that this is the latest hardware version, with many improvements!
X5105 brings you a whole new portable experience with its large 3,6 inch dot matrix LCD display providing all vital information easy to read in daylight or darkness. The built in 3800 mAh battery can power the radio for up to 8 hours in receive mode, perfect for your outdoor activities.
The highly effective automatic antenna tuner let you quickly deploy your portable station even if the antenna is not perfectly matched. The tuner stores tuning data in intervals of 100 kHz enabling instant retuning on previously tuned frequencies.
Physical shape and controls of the X5105 have been optimised for field use. Front panel buttons are backlit for operation in the dark and the VFO is optimised to be used with your thumb without being sensitive for accidental retuning.
The X5105 receiver is a double conversion superheterodyne with a digital baseband. A DAC samples the demodulated audio and feeds the high speed DSP processor. Noise reduction, notch filter and transmit signal processing is all handled by the high speed DSP.
In addition to voice modes (LSB, USB, AM and NFM) the X5105 can also be operated on CW with the facility to store short CW messages for one-touch transmit in the field. There is even a modem mode letting you decode PSK31 directly on the screen.
The local oscillator in the X5105 is based on a high performance DDS, Direct Digital Synthesizer. This provides a pure signal with low phase noise and wide frequency coverage. The high quality oscillator is the foundation of the transceivers great performance.
The stable and reliable push-pull power amplifier circuit in the X5105 provides up to 5 watt of transmit power in the whole HF and 6 meter range.
X5105 has an IF output which is used with the Xiegu XDT1 panadapter to display a frequency spectrum in color.
X5105 is a housed in a sturdy casing at the same compact and light. It measures only 160 x 100 x 46 mm and weights 0,94 kg including the battery.
| Weight | 1.5 kg |
|---|---|
| Dimensions | 29 × 23 × 11 cm |
Kommentarer 0
Hvis du logger deg inn,kan du lage en omtale for dette produktet og dele det med andre kunder.
Logg inn