Anytone AT6666 Pro 10 Meter Amateur Radio AM / FM / SSB / CW

80 Watts AM / SSB - 50 Watts FM
CTCSS/DCS Code
NRC Noise Reduction - Both RX & TX
Multi-Color Display

Mere info:

This new Pro version of the Anytone AT6666 builds off of their popular design with increased power output, noise reduction technology, programmable mic button, and TX bandwidth settings. The AT6666 Pro boasts 80 Watts (PEP) on AM/SSB, and 50 Watts FM, where the original version had 60 watts AM/SSB and 45 watts FM. The built in noise reduction function works on both receive and transmit to clean up any static or interference.

AT6666 PRO Features

AM, FM, USB, LSB, PA, CW Modes
80W on AM/SSB (PEP) - 50W FM
Echo Function
Squelch & ASQ (Auto-Squelch)
Dual Watch Function
Beep Voice Prompt
Emergency Call Function
Hi-Cut Filter
CTCSS / DCS Code
Multi-Color Display
NRC Noise Reduction Circuit for Transmit & Receive
PC Programmable
TOT Function
Scan Function
VOX Voice Activation
RX / TX Split
VFO / Channel Selection

AT6666 PRO Technical Specifications

Frequency Range	28.00 - 29.700 MHz (Programmable)
Frequency Step	10Hz, 100 Hz, 1 KHz, 5 KHz, 10 KHz, 100 KHz, 1 MHz
Frequency Tolerance	± 5.0 ppm
Temperature Range	-4 - 122 F
Microphone	6 pin with Push-to-Talk & Up / Down Buttons
Input Voltage	DC 13.8V Normal
Dimensions	6.22" x 1.88" x 9.84" \| 158mm x 48mm x 250mm
Antenna Connector	UHF, SO239
Power Output	AM / SSB - 80W (PEP) \| FM - 50W
Drain	15A (with modulation)
Modulation	FM / AM / USB / LSB / CW
Inter-Modulation Distortion	SSB 3rd order, more than -25dB \| 5th order, more than -35dB
SSB Carrier Suppression	55dB
Unwanted Sideband	50dB
Frequency Response	AM / FM 300 - 3000 Hz \| SSB 450 - 2500 Hz
Output Impedance	50 ohms, unbalanced

Kommentarer 0

Hvis du logger deg inn,kan du lage en omtale for dette produktet og dele det med andre kunder.

Logg inn

Produktets tagger

Det er ikke registrert noen tagger.

Mine tagger