Solar inverter ECO Solar Boost MPPT-3000 3.5kW PRO, Water heating

Solar inverter ECO Solar Boost MPPT-3000 3.5kW PRO, Water heating

Mere info:

The ECO Solar Boost MPPT-3000 PRO converter enables the direct use of photovoltaic panel systems to power resistance heating devices such as electric boilers, heaters, heating mats,water heating etc.

The system is simple, it only requires the connection of the appropriate number (4 to 9 pieces) of photovoltaic panels with an operating voltage of approx. 35V or a corresponding number of panels with a different voltage and an energy consumer, e.g. electric boiler, underfloor heating, etc.

The ECO Solar Boost MPPT-3000 PRO converter is equipped with an LCD display that informs the user about the parameters of the PV installation, such as:
PV array system voltage
electricity produced by PV panels
output power
total energy produced on the current day
the total energy produced in the previous day
total energy produced (measured from the first switch on)
In addition, the display shows current events and detected irregularities in the form of text messages.
LCD display

The direct current generated in the panels, which cannot be fed directly to the heating devices, is converted into alternating current in the inverter, which can be used to power the heating devices.

The maximum power of the system is 3.5kW, the converter has priority output number "1" and dependent output number "2".

Installation diagram
The simplest heating installation

This allows you to connect two heating devices, for example two boilers, one of which will heat first and the second when the thermostat of the first one stops receiving energy from the inverter. Thanks to the implemented MPPT function, the inverter automatically adapts to the performance of the heater and sets its operating point so that the energy received from the photovoltaic panel system is maximum.

ATTENTION! Heating devices with electronic regulators can only be powered from output number 1.

Tabuľka zobrazená vo fotografiách, ukazuje spôsob výberu optimálneho ohrievača v závislosti od výkonu a napätia FV systému. Výber optimálneho ohrievača zaručuje najvyššiu účinnosť FV systému na ohrev vody.

Technical parameters:

- input voltage [VDC]: 120 to 350 (VDC)
- output voltage [VAC]: 120 to 350 (VAC)
- maximum power: 3.5 kW
- MPPT function: YES
- connection of PV panels: Series or series-parallel
- voltage curve at the output: Modified sine
- VAC output #1: Priority
- VAC output #2: Dependent *
- under/over voltage protection: YES
- thermal protection: YES
- overload protection: YES
- working temperature: -25 °C ~ + 55 °C
- efficiency: > 96%
- cooling: Active
- power connector: MC4 connector
- output socket 230V: 2 x E (French with pin)
- case: Aluminum
- degree of protection (IP): IP21
- dimensions LxWxH [mm]: 320 x 272 x 96 mm
- weight (kg): 4.1 kg

Packaging: 1 pc

Package contents: 1pc Solar inverter ECO Solar Boost MPPT-3000 3.5kW PRO (Panels and boiler are not included in the package)

* The maximum power of the system is 3.5kW, the inverter has a priority output "1", which always has a voltage dependent output "2", which turns on when no power is consumed on output "1" and turns off when output "1 " will begin to drain energy again.