Nyhet
CB PNI ML50 antenna, length 48cm, 26-28MHz, 600W

CB PNI ML50 antenna, length 48cm, 26-28MHz, 600W

589,00 NOK

(inkl. mva.)

Veil. salgspris 589,00 NOK (inkl. mva.)


Ingen produktomtale

Vekt: 0,38 kg.
Lagerstatus: På lager
stk.

CB PNI ML50 antenna, length 48cm, 26-28MHz, 600W

 

The ideal choice of a CB antenna

For the right choice of a CB antenna, the following aspects must be taken into account: the mounting method, the length of the antenna depending on the desired communication distance and the positioning of the antenna on your car or truck. the quality of the signal transmitted and received. The quality of CB PNI antennas is already known by the very low values of the SWR.

cb antenna, cb station

PERFORMANCE: Maximum applied power 600 W

The CB PNI ML50 antenna is known for its performance and technical characteristics, and can be calibrated to a SWR of less than 1.2: 1. The antenna length of only 48 cm, the vertical polarization and the impedance of 50 Ohms offer a pleasant experience for any user of CB radio station.

It can be used on a frequency range between 26 - 28 MHz, in extreme weather conditions, withstanding temperatures between -26 ° and + 60 °, this is due to the high quality materials used for its manufacture. CB PNI ML50 antenna is built with great flexibility   due to the spring at the base of the wire, but also to the material: stainless steel.

Communication distance is another decisive factor in the acquisition and use of a CB antenna. PNI ML50 offers the possibility of a communication of up to 10 km in ideal working conditions: calibrated antenna, open field without obstacles, the station with the maximum power allowed by law and with a standard reception. Any obstacle such as: hills, mountains, buildings, walls can reduce this distance.

cb antenna, cb station

A SINGLE CB ANTENNA: Multiple possibilities of use

The CB PNI ML50 antenna can be used either on a magnetic base (we recommend PNI 145 / PL) or on a fixed support. The CB antenna comes fully equipped for mounting on any kind of fixed support (we recommend PNI L1, PNI T941, PNI SPA100, SPA110, SPA120 or SPA130) on a car or truck.

The package contains: RG58 cable with a length of 3.5 meters, SO239 PL 16mm mounting connector and rubber gasket.

Attention, it does not contain the PL259 connection plug in the station.

Product identification
Product code PNI-ML50
Working tape ? B
Product color (spike) Black
General characteristics
Working frequency 26 - 28 Mhz
Maximum power applied 600W
Minimum SWR in the center of the band 1.0
Length 480 mm
Impedance 50 Ohm
Connector tip SO239
Hole diameter (mm) 16 mm
Cable length 3.5m
Weight 384g
size 510 X 45 X 45
Polarization vertically
The package contains
Radio station antenna Yes
RG58 cable 3.5 m with SO239 ceiling mount

Kommentarer 0


Produktets tagger

Det er ikke registrert noen tagger.

Mine tagger